How deep to drive cam seal?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How deep to drive cam seal? [Re: mike71800b] #1073143 07/23/14 06:05 AM

Joined: Nov 2013

Posts: 94

Oregon

GrantCee

Getting the Wheeling Fever

Uh-oh; I drove it in just a little deeper, maybe 3/16" - is that going to be a problem?

1987 Montero SWB, 2.6L, 5spd
Weber conversion
2-valve head from Engine Machine Service
"4G54 FTW!"

Entire Thread
Subject	Posted By	Posted
How deep to drive cam seal?	GrantCee	07/18/14 10:52 PM
Re: How deep to drive cam seal?	GrantCee	07/22/14 07:15 PM
Re: How deep to drive cam seal?	mike71800b	07/23/14 04:48 AM
Re: How deep to drive cam seal?	GrantCee	07/23/14 06:05 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.517s Queries: 16 (3.515s) Memory: 0.5969 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-06-23 11:23:02 UTC
Valid HTML 5 and Valid CSS