Might have spun a main bearing...

Print Thread

Rate Thread

Re: Might have spun a main bearing... [Re: Malykaii] #1073552 08/11/14 08:56 AM

Joined: May 2000

Posts: 6,132

Portland OR

Kevin C

Trail Leader

I would check the balance shafts, running low on oil can make a mess of them.

Also, when you lose a bearing the cam tends to get scored up. Bearing trash embeds in the head but not very deep... Seems to eat the cam.

87 Turbo Intercooled Raider, roller cam, torsen rear diff, LSD front diff, lockup auto with modified converter, V6 brakes, low transfer case gears...

Entire Thread
Subject	Posted By	Posted
Might have spun a main bearing...	DR1665	08/07/14 06:22 PM
Re: Might have spun a main bearing...	haztoys	08/08/14 04:39 AM
Re: Might have spun a main bearing...	DR1665	08/08/14 03:33 PM
Re: Might have spun a main bearing...	TOASTY	08/08/14 04:09 PM
Re: Might have spun a main bearing...	DR1665	08/10/14 12:45 AM
Re: Might have spun a main bearing...	Malykaii	08/11/14 04:15 AM
Re: Might have spun a main bearing...	Kevin C	08/11/14 08:56 AM
Re: Might have spun a main bearing...	Malykaii	08/11/14 02:23 PM
Re: Might have spun a main bearing...	DR1665	08/11/14 10:03 PM
Re: Might have spun a main bearing...	AZRaider	08/11/14 10:34 PM
Re: Might have spun a main bearing...	Kevin C	08/12/14 03:58 AM
Re: Might have spun a main bearing...	DR1665	08/12/14 06:16 PM
Re: Might have spun a main bearing...	Dukar	08/13/14 11:57 PM
Re: Might have spun a main bearing...	Malykaii	08/08/14 11:54 AM
Re: Might have spun a main bearing...	monte3	08/08/14 03:16 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: