A/C High side port question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: A/C High side port question [Re: mike71800b] #1073675 08/14/14 04:00 AM

Joined: Feb 2005

Posts: 1,511

Phoenix, AZ

ryany

Body Damage is Cool

I thought that R12 ports used a standardized threaded connector, and R134 ports were a quick release connector - completely different designs to prevent using the incorrect type of refrigerant?

95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes

Entire Thread
Subject	Posted By	Posted
A/C High side port question	mike71800b	08/14/14 02:45 AM
Re: A/C High side port question	ryany	08/14/14 04:00 AM
Re: A/C High side port question	mike71800b	08/14/14 04:57 AM
Re: A/C High side port question	mxmikie	08/14/14 07:57 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 16 (3.511s) Memory: 0.5975 MB (Peak: 0.6305 MB) Data Comp: Off Server Time: 2026-06-10 02:12:26 UTC
Valid HTML 5 and Valid CSS