Quote

Do I need V6 caliper brackets with my Gen2 calipers? Is that what makes the geometry work?


Yes. Gen 2 brackets. Did you install Gen 2 rotors? '95/'96 SR...

I'm not sure if #5, #6 & #7 from RX list above is needed. I didn't do those, although mine is an '88. The MC bore is the same from the '88 to the V6. Hoses are a must.

Rotors:
Gen 1 4 cyl: Diameter [mm]: 255.0; Brake Disc Thickness [mm]: 20.0

Gen 2 (SR) Diameter [mm]: 276.0; Brake Disc Thickness [mm]: 24.0

Finish it with some braided sst lines:

2x RUS-656242 (Front Hoses)

Rear:
RUS-656242 - check the length.

3x RUS-641411 (10mm to AN3 adapters)

  • '83 Might Max: IG @83mmax
  • '88 Raider: my OG
  • '89 Raider: rescued
  • '92 RS M/T: sold
  • '93 SR: sent to crusher
  • '05 Montero LTD: sold
  • '18 PHEV: wife's daily
  • '14 OL GT
  • http://www.tuffpans.com