Timing belt/what else to replace or expect

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Timing belt/what else to replace or expect [Re: METALMOVER] #1073882 08/23/14 07:01 AM

Joined: Aug 2014

Posts: 173

New York

danz91crx

Wheeler

This is the part number for the gates water pump I purchased that came with the correct o ring for the montero 43551.
This is the oem mitsubishi part number for the o ring itself MD030763
A complete gasket kit would be the way to go if you need valve cover gaskets, upper and lower intake comes off for that too.
Id suggest putting your new timing belt on before you start taking things apart too much and do a compression test on all cylinders.

1990 LWB RS A/T
1990 LWB Base A/T
1991 LWB LS A/T Going...Going...

Entire Thread
Subject	Posted By	Posted
Timing belt/what else to replace or expect	METALMOVER	08/22/14 08:50 PM
Re: Timing belt/what else to replace or expect	Malykaii	08/22/14 09:04 PM
Re: Timing belt/what else to replace or expect	METALMOVER	08/22/14 09:12 PM
Re: Timing belt/what else to replace or expect	haztoys	08/22/14 09:25 PM
Re: Timing belt/what else to replace or expect	fasteddy	08/22/14 09:36 PM
Re: Timing belt/what else to replace or expect	METALMOVER	08/23/14 12:57 AM
Re: Timing belt/what else to replace or expect	danz91crx	08/23/14 07:01 AM
Re: Timing belt/what else to replace or expect	sasnydley	08/23/14 01:47 PM
Re: Timing belt/what else to replace or expect	METALMOVER	08/24/14 04:06 AM
Re: Timing belt/what else to replace or expect	danz91crx	08/22/14 09:10 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: