Grease fittings Clean or replace?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Grease fittings Clean or replace? #1073916 08/24/14 05:55 PM

Joined: Dec 2004

Posts: 949

Mill Hall, PA

Monty

Rock Warrior

Was going to lube all the grease fittings on the raider today, but only a few took grease. Found a tool for 50 bucks to clean them out. Or should I just replace them? If I do replace what size are they?

1989 Raider V6/MT
2005 Jeep Liberty CRD Turbo Diesel

Entire Thread
Subject	Posted By	Posted
Grease fittings Clean or replace?	Monty	08/24/14 05:55 PM
Re: Grease fittings Clean or replace?	rxinhed	08/24/14 06:03 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.081s Queries: 15 (3.957s) Memory: 0.5946 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-07-14 21:35:48 UTC
Valid HTML 5 and Valid CSS