Replacing dodge raider wheel bearings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replacing dodge raider wheel bearings [Re: mfarmer10] #1074105 09/03/14 04:33 AM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

Quote

Hey all,
I see there is a thread on replacing wheel bearings on a gen 2 montero. Is it much different than the gen 1. I have an 89 raider v6. Is this a very difficult task? Any tips?
Thanks,
Mackinley

Wear rubber gloves when packing the bearings. Messy job

89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch

Entire Thread
Subject	Posted By	Posted
Replacing dodge raider wheel bearings	mfarmer10	09/03/14 03:06 AM
Re: Replacing dodge raider wheel bearings	rxinhed	09/03/14 03:57 AM
Re: Replacing dodge raider wheel bearings	Mudraider	09/03/14 04:33 AM
Re: Replacing dodge raider wheel bearings	fasteddy	09/03/14 05:08 AM
Re: Replacing dodge raider wheel bearings	JohnnyBfromPeoria	09/07/14 05:02 PM
Re: Replacing dodge raider wheel bearings	fasteddy	09/07/14 05:32 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 16 (3.523s) Memory: 0.6025 MB (Peak: 0.6355 MB) Data Comp: Off Server Time: 2026-06-20 16:52:08 UTC
Valid HTML 5 and Valid CSS