Looks pretty close to the Cree light bars I'm running on my ARB.....in front of the grill are/have two small 18W (36W total) that throw out a (surprisingly)good light by themselves....on each side have 108W (216W total) light bars below each headlight with 3 independent switches center/left/right.....I did have one 108W in the center but it blocked air flow so I went for the 2 smaller ones - grabbed another 108W putting one on each side.....happy with the look and the result.....had 2 KC 130W Daylighters before but like the smaller running drain/draw of the LED's......they also are flood/distance - one reason for going with 2 so I can aim one up if/as wanted/needed......the bracketing is different on mine and the LED bars run heavy....1st when on the center I mounted solid and it took 6 months to destroy the brackets....had new brackets fabricated and mounted by running larger bolts + cut sway bar link pin bushings in 1/2 using half over/half under the bumper with double nutted stainless bolts/washers.....holding well so far with no loosening or bracket metal fatigue.....tried to attach a pic but won't let me.....but the pics were in broad daylight and the lights over powered the camera.....

Last edited by Pete_D; 10/29/14 10:33 AM.

3=(PI.98 SWB 2.8TD-TH92.LWB 2.8TD)Red90 SWB.V6/bal,forged pistons,bore/95SR lkr&spr/2 bouncies/(ARB.w/Gorilla 12K winch/new stg gear/stg&sus/CJ side mirr/cust tow rec/01 SR wh w/Mich 265-70-16LTX/Rancho5000's/Candy Apple/rock crawlers/Hellas/KC's