Source for Cutting, Drilling, and Abrasives

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Source for Cutting, Drilling, and Abrasives #1074622 10/05/14 11:35 PM

Joined: Feb 2000

Posts: 6,247

Bel Buckle, TN

4x4Wire

Trail Leader

Came across this vendor at the 2014 Lucus Oil Of Road Expo in Pomona as a supplier of Grind Tool Abrasives: Cutting, Drilling, Abrasives, & Safety

Their selection is wide with many hard to find items. Prices are reasonable...

http://www.grindtoolabrasives.com/

John Stewart
Editor - 4x4Wire.com
Editor - 4x4Voice
Editor - MUIRNet-News
President - BlueRibbon Coalition

Entire Thread
Subject	Posted By	Posted
Source for Cutting, Drilling, and Abrasives	4x4Wire	10/05/14 11:35 PM
Re: Source for Cutting, Drilling, and Abrasives	Mudraider	10/09/14 01:58 PM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.413s Queries: 15 (3.411s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-05-27 14:25:14 UTC
Valid HTML 5 and Valid CSS