Timing belt snapped on '00

Print Thread

Rate Thread

Re: Timing belt snapped on '00 [Re: pcc] #1074634 10/08/14 02:24 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

I would not do a compression test. A valve may be stuck extended, and you could do more damage. What speed was the engine at when the belt broke? This will give you an idea of how much damamge was done.

Ultimately, you'll have to pull at least one head, probably both, before you know what it's going to cost.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Timing belt snapped on '00	Fujisawa_Rob	10/06/14 03:03 PM
Re: Timing belt snapped on '00	cheesegrater	10/06/14 03:53 PM
Re: Timing belt snapped on '00	monte3	10/06/14 07:28 PM
Re: Timing belt snapped on '00	Fujisawa_Rob	10/27/14 08:12 PM
Re: Timing belt snapped on '00	pcc	10/07/14 11:07 PM
Re: Timing belt snapped on '00	fasteddy	10/08/14 02:24 AM
Re: Timing belt snapped on '00	cheesegrater	10/08/14 11:44 AM
Re: Timing belt snapped on '00	fasteddy	10/08/14 07:13 PM
Re: Timing belt snapped on '00	cheesegrater	10/08/14 09:23 PM
Re: Timing belt snapped on '00	fasteddy	10/08/14 10:58 PM
Re: Timing belt snapped on '00	Fujisawa_Rob	10/27/14 08:16 PM
Re: Timing belt snapped on '00	fasteddy	10/27/14 10:19 PM
Re: Timing belt snapped on '00	Fujisawa_Rob	10/28/14 01:27 AM
Re: Timing belt snapped on '00	Fujisawa_Rob	10/28/14 03:13 PM
Re: Timing belt snapped on '00	Fujisawa_Rob	10/27/14 08:10 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: