Removing wax from factory fender flares

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Page 2 of 2

Re: Removing wax from factory fender flares #107567 03/27/03 08:33 PM

Anonymous

Unregistered

I have an article from Car & Driver that suggests Rubbing Alcohol... might be a bit cleaner than Penut Butter.

I also use a product called Meguier's (or maybe it's Mothers... one of those two) Back to Black... works great on all the trim.

<small>[ March 27, 2003, 02:34 PM: Message edited by: Lunchbox ]</small>

Re: Removing wax from factory fender flares #107568 03/27/03 09:40 PM

Anonymous

Unregistered

I have used the "back to black" and it works for about a week then the wax shows up again. Like it is stated above, use peanut butter!

Re: Removing wax from factory fender flares #107569 03/28/03 02:48 AM

Joined: Mar 2002

Posts: 125

jupiter, florida

ufjaz

Wheeler

Corey,

I'm surprised you didn't mention "Forever Black". I bought some based on your recommendation.

I guess it's a dye. (Actually with the applicator I suspect it might be shoe polish.) But I found it to work beautifully!

1996, 2wd, auto trans, deck plate, Addco sway bars, 17 wheels, Borla Cat Back, TRD headers, TRD SC, Bilstein shocks, 4.10 regear, TRD LSD, L10 VB/TC/PTS mods, Hayden tranny cooler, FTC1, 305 cc FI, Supra MAF, Walbro fuel pump

Re: Removing wax from factory fender flares #107570 03/28/03 02:58 AM

Anonymous

Unregistered

If they're the same as Tacoma flares: Bon Ami

Page 2 of 2

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social: