I'm a visual learner too, but I can't find those old pics rt now. I can tell you the install is straight forward for the most part.

The template is pretty much spot on.

You'll need to fabricate tubing from the snorkel (round opening) to the intake hose (oval opening). I used a piece of plastic rain gutter fitting to do this along with lots of tape. I'm not sure what the tape was but it's available from home depot. IIRC, it was aluminum on one side. Thick black adhesive on the other side. Grasscat knows for sure.

Again, use stainless steel hardware to mount it or you'll be sorry.

Ask any questions and I'll do my best to answer them. Oh and I do have the rig so I can go out to take some "after" pics if it helps.

HTH.