Need a better axle shaft remover

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Need a better axle shaft remover [Re: 4x4Wire] #1076268 01/13/15 07:39 PM

Joined: Aug 2014

Posts: 173

New York

danz91crx

Wheeler

Yeah, I did look and did a site search with google for a post also have the factory service manual. Looks pretty straight forward I think its just that I maybe need to use better tools. Like a 5-10lb slide hammer might work rather then my 3lb. I'll try asking in the Mitsubishi section

Thanks

1990 LWB RS A/T
1990 LWB Base A/T
1991 LWB LS A/T Going...Going...

Entire Thread
Subject	Posted By	Posted
Need a better axle shaft remover	danz91crx	01/12/15 03:27 AM
Re: Need a better axle shaft remover	4x4Wire	01/13/15 12:57 AM
Re: Need a better axle shaft remover	danz91crx	01/13/15 07:51 AM
Re: Need a better axle shaft remover	4x4Wire	01/13/15 10:13 AM
Re: Need a better axle shaft remover	danz91crx	01/13/15 07:39 PM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.518s Queries: 16 (3.515s) Memory: 0.6022 MB (Peak: 0.6351 MB) Data Comp: Off Server Time: 2026-07-15 16:50:25 UTC
Valid HTML 5 and Valid CSS