I am new to the Forum, but have picked up some tips over time before signing up. I am trying to load some pics of my Montero, my first introduction would not let me load one. I am trying a second time to attach one.
My Montero is only used for off road. I have never made it street legal because I only wanted it for a 4 x 4. It is a little beat up, but I have had a lot of fun with it.
I cannot seem to attach a picture. I followed the process, it must be a file / browser compatibility issue.
Last edited by BrushBuster; 01/26/1505:14 PM.
1984 Montero, 2.6 - 5 speed, Weber 38 DGES carb, header and flowmaster no CAT, original AISIN locking hubs, 31 x 10.5 x 15 Goodyear MTR Kevlar, 3 inch body lift, KYB Shocks, 1974 Warn 8274 winch
C'mon BrushBuster, send Russell those pics. I wanna see an early one all modded up and wheeling. I bought a grill from an 84 to put on a vehicle I don't even own yet!
89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch
I e-mailed the only picture that I have on my work computer. I have some more that I will post when I can figure out why my attachments are not loading.
1984 Montero, 2.6 - 5 speed, Weber 38 DGES carb, header and flowmaster no CAT, original AISIN locking hubs, 31 x 10.5 x 15 Goodyear MTR Kevlar, 3 inch body lift, KYB Shocks, 1974 Warn 8274 winch
Thanks for uploading for me. My file attachments still do not seem to load.
I did say it was a little beat up, but that is what I bought it for 11 years ago. In the picture it is on jack stands so it does not stand that tall, I was installing new shocks, front CV axles, new seals front to back, etc... As bad as it may look, it runs great and goes through most anything I can find to take it through.
Notice how skinny the front tires look compared to the back. That is the difference in stock 6" rims and new 8" rims. I have to buy two more 8" rims for the front.
I have more pics of it out in the brush, when I can upload pictures.
Last edited by BrushBuster; 01/28/1507:13 PM.
1984 Montero, 2.6 - 5 speed, Weber 38 DGES carb, header and flowmaster no CAT, original AISIN locking hubs, 31 x 10.5 x 15 Goodyear MTR Kevlar, 3 inch body lift, KYB Shocks, 1974 Warn 8274 winch
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.