Trailing arm bushing change tools needed

Print Thread

Rate Thread

Re: Trailing arm bushing change tools needed [Re: MI_Mitsu] #1076534 01/27/15 10:21 PM

Joined: Apr 2004

Posts: 448

Seattle, WA

jdavis

Mudrunner

I did not change the bushing in the trailing arm itself.

Just did the front bushings and all that took was a 24 mm deep socket if IRC. After replacing the OEM rubber ones twice, I went with urethane ones.

~ Jon

95 Montero SR
33 x 12.50
Aussie Locker
OME Heavy Duty Coils & Torsion Bars
ARB Front Bumper
76" Trail Gear Rock Sliders
XRC-9.5K Winch

Entire Thread
Subject	Posted By	Posted
Trailing arm bushing change tools needed	MI_Mitsu	01/27/15 09:55 PM
Re: Trailing arm bushing change tools needed	jdavis	01/27/15 10:21 PM
Re: Trailing arm bushing change tools needed	Jeep2Montero	01/28/15 09:25 AM
Re: Trailing arm bushing change tools needed	jdavis	01/28/15 09:11 PM
Re: Trailing arm bushing change tools needed	MarkG	02/08/15 05:57 PM
Re: Trailing arm bushing change tools needed	MI_Mitsu	02/11/15 11:47 PM
Re: Trailing arm bushing change tools needed	JohnnyBfromPeoria	02/12/15 02:22 AM
Re: Trailing arm bushing change tools needed	ryany	02/15/15 03:11 AM
Re: Trailing arm bushing change tools needed	JohnnyBfromPeoria	02/15/15 04:04 PM
Re: Trailing arm bushing change tools needed	MarkG	01/27/15 10:27 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: