Trailing arm bushing change tools needed

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Trailing arm bushing change tools needed [Re: jdavis] #1076536 01/28/15 09:25 AM

Joined: Apr 2014

Posts: 95

Utah

Jeep2Montero Offline

Getting the Wheeling Fever

Quote

I did not change the bushing in the trailing arm itself.

Just did the front bushings and all that took was a 24 mm deep socket if IRC. After replacing the OEM rubber ones twice, I went with urethane ones.

~ Jon

Jon, whats the part number for the urethane ones? Also, how much lift did you gain with the OME coils and torsions?

Last edited by Jeep2Montero; 01/28/15 09:27 AM.

Epxo rig-98 Montero "SR" with ARB front bumper and 33x9.50's

Trail rig-97 ZJ V8 with long arms and 35's, trailer queen

Entire Thread
Subject	Posted By	Posted
Trailing arm bushing change tools needed	MI_Mitsu	01/27/15 09:55 PM
Re: Trailing arm bushing change tools needed	jdavis	01/27/15 10:21 PM
Re: Trailing arm bushing change tools needed	Jeep2Montero	01/28/15 09:25 AM
Re: Trailing arm bushing change tools needed	jdavis	01/28/15 09:11 PM
Re: Trailing arm bushing change tools needed	MarkG	02/08/15 05:57 PM
Re: Trailing arm bushing change tools needed	MI_Mitsu	02/11/15 11:47 PM
Re: Trailing arm bushing change tools needed	JohnnyBfromPeoria	02/12/15 02:22 AM
Re: Trailing arm bushing change tools needed	ryany	02/15/15 03:11 AM
Re: Trailing arm bushing change tools needed	JohnnyBfromPeoria	02/15/15 04:04 PM
Re: Trailing arm bushing change tools needed	MarkG	01/27/15 10:27 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: