Injection pump priming

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Injection pump priming [Re: gaberc51] #1076697 02/09/15 07:35 PM

Joined: Nov 2008

Posts: 1,435

Milwaukee Wisconsin

plh

Body Damage is Cool

The factory water separator has a little hand pump on it. Sorry I don't have a photo of mine handy.

Could probably use something like a Racor (Parker) 230 or 215 as the Mitsubishi units are a bit hard to find in the USA.

'83 Might Max: IG @83mmax
'88 Raider: my OG
'89 Raider: rescued
'92 RS M/T: sold
'93 SR: sent to crusher
'05 Montero LTD: sold
'18 PHEV: wife's daily
'14 OL GT
http://www.tuffpans.com

Entire Thread
Subject	Posted By	Posted
Injection pump priming	gaberc51	02/07/15 04:55 PM
Re: Injection pump priming	plh	02/09/15 07:35 PM
Re: Injection pump priming	gaberc51	02/10/15 02:52 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.723s Queries: 16 (4.039s) Memory: 0.5978 MB (Peak: 0.6308 MB) Data Comp: Off Server Time: 2026-11-14 17:10:31 UTC
Valid HTML 5 and Valid CSS