Will Gen III 3.8 mate up to Gen II tranny in a 95LS?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech Will Gen III 3.8 mate up to Gen II tranny in a 95LS?

Print Thread

Rate Thread

Re: Will Gen III 3.0 mate up to Gen II tranny in a 95 LS? [Re: DVoeks] #1076772 02/13/15 07:21 PM

Joined: May 2014

Posts: 34

WI, Washington

JoeBurt

Getting the Wheeling Fever

Edit: Sorry. I basically just repeated everything Jeep2Montero said.

Gen III's have a 3.5 or a 3.8 from 2003 to 2006. Gen III's are also drive by wire throttle. No throttle cable.

Don't know if that matters or not.

I would think all of the sensors we need to be swapped and possibly intake manifolds/ exhaust manifolds/ EGR system from the Gen II truck to the Gen III engine.

If you are talking about a 2001 Montero Sport Limited, I believe they still used the 6G72.

Last edited by JoeBurt; 02/13/15 07:22 PM.

Entire Thread
Subject	Posted By	Posted
Will Gen III 3.8 mate up to Gen II tranny in a 95LS?	DVoeks	02/12/15 09:27 AM
Re: Will Gen III 3.0 mate up to Gen II tranny in a 95 LS?	Jeep2Montero	02/12/15 06:52 PM
Re: Will Gen III 3.0 mate up to Gen II tranny in a 95 LS?	JoeBurt	02/13/15 07:21 PM
Re: Will Gen III 3.0 mate up to Gen II tranny in a 95 LS?	DVoeks	02/17/15 01:24 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: