|
|
Another source for 3.5 DOHC Parts
#1076980
02/28/15 05:13 AM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
This was brought up before, but didn't garner much interest. But from what I can see the 01-06 sorrento, used the mitsu 6g74 DOHC mounted frontwards (not sideways) just like the Montero. The upper intake looks identical was well,not sure if all the vacuum nipples are the same but no doubt that this is the same engine in our 94-96 SR's and should be mined for newer parts at the yards accordingly. google the sorrento 3.5 engine and you guys with the cammer engines will see what I mean. 2006 sorrento: ![[Linked Image]](http://images.gtcarlot.com/customgallery/engine/44709418.jpg)
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: Another source for 3.5 DOHC Parts
[Re: justice]
#1076981
02/28/15 06:31 AM
|
Joined: Jun 2002
Posts: 6,211
Trail Leader
|
Thank you, Justice. Great find.
John B.
'87 Raider 2.6 Turbo Auto, Under Construction '95 Montero SR, 35x12.5/15 BFG M/T KM-2's, Rock sliders, Qtr panel chop, gas tank lift, 2" BL, Aisins, 5.29s '95 Pajero Mini '98 Montero Winter Ed. '04 Cadillac XLR '03 Kawasaki ZRX1200R '60 Ford Falcon 4Dr
|
|
Re: Another source for 3.5 DOHC Parts
[Re: JohnnyBfromPeoria]
#1076982
02/28/15 03:34 PM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
Wow, I would have loved to have looked into that before I got my current replacement engine. I bet there are some solid improvements since our years.
|
|
Re: Another source for 3.5 DOHC Parts
[Re: Lloyd Swartz]
#1076983
02/28/15 03:36 PM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
192HP OUCH! Sounds like they went BACKWARDS like everything. I bet the Montero would barely move with that engine.
|
|
Re: Another source for 3.5 DOHC Parts
[Re: Lloyd Swartz]
#1076984
02/28/15 06:06 PM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
192HP, due to ECU de-tune to run regular octane gas, most likely(retarded timeing). But some things warrant more investigation. Same cams? Unknown... Lower CR pistons? Thats a possibly. wont know untill we look into this further. but it would be great if we could get long blocks ont of wrecked vehicles from 06..We might have just gained 10 years.
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: Another source for 3.5 DOHC Parts
[Re: justice]
#1076985
02/28/15 06:41 PM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
Type V-type six-cylinder, iron block and aluminum head Valve gear DOHC, four valves/cylinder Bore x stroke 3.66 x 3.38 in./93.0 x 85.5 mm Displacement 213.4 cu. in./3497 cc Compression ratio 10.0:1 Horsepower (SAE net) 192 bhp @ 5500 rpm Torque (SAE net) 217 lb.-ft. @ 3000 rpm Emission control system Three-way catalyst Ignition Electronic Fuel system Multi-port electronic fuel injection Fuel pump Electromagnetic Fuel requirement Unleaded (87 octane or higher) Fuel tank capacity 21.1 gal./80 liters Cooling system Liquid cooled Coolant capacity 11.6 quarts/11.0 liters Engine oil capacity 4.5 qts./4.3 liters
Kia 3.5 DOHC Specs I'll have to look up the Montero ones
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: Another source for 3.5 DOHC Parts
[Re: justice]
#1076986
02/28/15 07:03 PM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
Still think its a backwards move from 225hp, but I wonder what the power band looks like as well? I guess its all relative the 92-93 Montero with 156HP was like driving a tank stuck in concrete <img src="/forums/images/graemlins/lol.gif" alt="" />
|
|
Re: Another source for 3.5 DOHC Parts
[Re: Lloyd Swartz]
#1076987
02/28/15 09:39 PM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
Not really a move back for what we would be using it for. this engine with the Montero upper intake and ECU would put out the 215HP same as Montero. Bore and stroke appear to be the same. need to compare compression ratio, etc.
Remember the mitsu DOHC ecu is tuned for premium 91 octane, while the Kia is detuned for 87 octane.
Need to find out if the detune is stricly ECU or not. If its the ECU only, easy money. If its ecu and cams, still easy. If pistons, not so much.
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: Another source for 3.5 DOHC Parts
[Re: justice]
#1076988
02/28/15 09:47 PM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
Interesting. Would be great to have options since rebuilds never seem to work out.
|
|
Re: Another source for 3.5 DOHC Parts
[Re: Lloyd Swartz]
#1076989
02/28/15 10:45 PM
|
Joined: Aug 2009
Posts: 989
Rock Warrior
|
Interesting. Would be great to have options since rebuilds never seem to work out. Please stop saying the 3.5 'can't' be reman and stop the rumors ... Its BS and your wrong.... I did a part number look and 'nothing' crosses over to a SR from this motor ... Not even the crank ... The crank list the Monty sport ,,,Monty ,,, and cars... But thats it ...??????? Not trying to be a horses a$$ just want facts ... Have a good day Captain Gear Box Hazardous Toys inc
Last edited by haztoys; 02/28/15 10:53 PM.
|
|
|
|