Try Fatastic cleaner too ..EZoff will hammer alum look out .. Its is great on steel ..

Lots of the Mitsu seats will bolt or all most bolt .. The only arm rest seats "I" know of are in GEN2 Montys .. Steath and Eclipc seats will get you leg room in truck or Monty ... Starion seats need washers on inside to set right .. But Starion seats in a truck once you get in you stuck in the truck for life .. The grey seats you have John from me where in a truck at one time ...I have GEN2 bucket seat mounts if needed .. The froor on GEN2 is the same as GEN1 ...Most seat swaps into trucks need the plastic under part worked over and mounts made to look 'clean'..

Easy seat swaping in most Mitsu 'flat bottom seats" non-power ..

Now power seats I have no clue on.. This info is non-power seats...

How big is the crack ..?.. Is it a exploded crack as Mitzu's will do .. OR.......?

Do the ...Drill and pin.. Drill and pin ...Drill and pin..On the crack..? .. No ...???

My good friend ... <img src="/forums/images/graemlins/kewl.gif" alt="" />....