|
|
|
|
 Re: Gen1 Mass experiment
[Re: JohnnyBfromPeoria]
#1077601
04/12/15 11:51 PM
|
Joined: Aug 2009
Posts: 989
OP
Rock Warrior
|
I findly got around to modding a 'round MAS' ... Have had info in my head and on paper on how they really work for some time now... Just no time to RnD the mod .. Did some rework on the circuit board to up the fuel ... Get lots more air into the motor around the MAS ... But the MAS seems to keep fueling and not going looney over the bypass of the air .. One problem with GEN1 EFI as HP goes is the MAS plugs up the intake track ... I'm at a point where the TB is now the problem ... Have a 'almost' bolt on TB that ups the TB square MM by 30 plus over stock thats nexted ... Anyone have a 89 upper intake ...?
Captain Gear Box
Hazardous Toys inc
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 7.488s Queries: 16 (3.491s) Memory: 0.6056 MB (Peak: 0.6386 MB) Data Comp: Off Server Time: 2026-07-15 04:15:37 UTCValid HTML 5 and Valid CSS 
