Gen 1 seatbelt reciever

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen 1 seatbelt reciever #1077705 04/12/15 12:23 AM

Joined: Dec 2014

Posts: 11

Florida

Raider17

Need a Spot

My 89 Raider seatbelt receiver decided to biodegrade and collapse on itself. Before I search high and low in the salvage yards, does anyone have a parts vehicle with a passenger side seatbelt receiver? This is the end, mounting to the floor? I would greatly appreciate it and can pay you via paypal no problem!

Cell Steven 270 839 5415 located in the panhandle of Fl

89 Raider 2.6/38 Weber/2" lift/32x11.50/9.5k smitty built/custom bumpers/roof rack

Entire Thread
Subject	Posted By	Posted
Gen 1 seatbelt reciever	Raider17	04/12/15 12:23 AM
Re: Gen 1 seatbelt reciever	heathdogg	04/12/15 04:10 AM
Re: Gen 1 seatbelt reciever	Raider17	04/12/15 02:32 PM
Re: Gen 1 seatbelt reciever	rxinhed	04/12/15 09:49 PM
Re: Gen 1 seatbelt reciever	JohnnyBfromPeoria	04/13/15 05:11 AM
Re: Gen 1 seatbelt reciever	heathdogg	04/13/15 05:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.631s Queries: 15 (4.629s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-06 22:14:49 UTC
Valid HTML 5 and Valid CSS