Gen II - OME Coils with Bilsteins 4600?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen II - OME Coils with Bilsteins 4600? [Re: 6G74_SR] #1077744 04/18/15 12:43 AM

Joined: Apr 2014

Posts: 95

Utah

Jeep2Montero Offline

Getting the Wheeling Fever

You will be just fine, especially if your rear sway bar is still hooked up to limit flex. Or you can read one of the recent threads on the perfect length kyb shocks for those OME springs and be ahead of the game.

Epxo rig-98 Montero "SR" with ARB front bumper and 33x9.50's

Trail rig-97 ZJ V8 with long arms and 35's, trailer queen

Entire Thread
Subject	Posted By	Posted
Gen II - OME Coils with Bilsteins 4600?	6G74_SR	04/17/15 03:33 AM
Re: Gen II - OME Coils with Bilsteins 4600?	Jeep2Montero	04/18/15 12:43 AM
Re: Gen II - OME Coils with Bilsteins 4600?	6G74_SR	04/18/15 08:46 PM
Re: Gen II - OME Coils with Bilsteins 4600?	Jeep2Montero	04/18/15 10:01 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.680s Queries: 16 (3.500s) Memory: 0.5994 MB (Peak: 0.6324 MB) Data Comp: Off Server Time: 2026-06-09 23:00:31 UTC
Valid HTML 5 and Valid CSS