|
|
|
|
Re: Gen II - OME Coils with Bilsteins 4600?
[Re: 6G74_SR]
#1077746
04/18/15 10:01 PM
|
Joined: Apr 2014
Posts: 95
Getting the Wheeling Fever
|
thanks for the info,man id actually like to consider the monomax but lately I've been reading negative feedback like "they're leaking at 5k miles or being blown out under 10k". i have personal experience with my dads work truck an 08 tundra trd with the stock blisteins and those things can take a beating. i hit rough dirt roads at 50mph with 400lbs in the bed atlas 3 times a week and they're still running great.
but then again i can buy two sets of monomax for one set of bils. any part number on that ideal kyb for the ome spring? i tried looking for the post you mentioned but was not in luck http://www.4x4wire.com/forums/showflat.php?Cat=0&Number=1297081&Main=1297043
Epxo rig-98 Montero "SR" with ARB front bumper and 33x9.50's
Trail rig-97 ZJ V8 with long arms and 35's, trailer queen
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 8.864s Queries: 16 (3.723s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-12 19:44:29 UTCValid HTML 5 and Valid CSS