How to get old valve cover gaskets out?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How to get old valve cover gaskets out? [Re: Fujisawa_Rob] #1077769 04/18/15 12:41 AM

Joined: Mar 2013

Posts: 51

Oklahoma

Czd3my

Getting the Wheeling Fever

A heat gun works really well, short of setting them on fire.

1998 Montero (CW Pack)
1979 Chevy LUV 4x4
2000 GMC 2500 4X4

Entire Thread
Subject	Posted By	Posted
How to get old valve cover gaskets out?	Fujisawa_Rob	04/17/15 08:07 PM
Re: How to get old valve cover gaskets out?	TOASTY	04/17/15 08:28 PM
Re: How to get old valve cover gaskets out?	Fujisawa_Rob	04/17/15 08:47 PM
Re: How to get old valve cover gaskets out?	TOASTY	04/18/15 12:36 AM
Re: How to get old valve cover gaskets out?	Czd3my	04/18/15 12:41 AM
Re: How to get old valve cover gaskets out?	Fujisawa_Rob	04/20/15 06:41 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.714s Queries: 16 (3.712s) Memory: 0.6027 MB (Peak: 0.6357 MB) Data Comp: Off Server Time: 2026-06-07 02:49:56 UTC
Valid HTML 5 and Valid CSS