|
|
|
|
post head gasket problems
#1078112
05/18/15 09:33 PM
|
Joined: May 2015
Posts: 24
OP
Need a Spot
|
well I finally put everything back together after doing my head gasket.
The engine fired right up and is very responsive.
but it still smokes.
and the valves are really loud now. they werent before the project
When it warmed up i was trying to burp the cooling system and there wasn't any flow in the radiator. The upper hose was hot but the bottom one was cold. Did i install the thermosat wrong? its brand new OEM
when i shut off the engine some coolant dribbled out from behind the timing cover i think . the water pump was also replaced.
Last edited by fzj80joe; 05/18/15 09:36 PM.
|
|
Re: post head gasket problems
[Re: fzj80joe]
#1078113
05/18/15 09:34 PM
|
Joined: May 2015
Posts: 24
OP
Need a Spot
|
|
|
|
Re: post head gasket problems
[Re: fzj80joe]
#1078114
05/19/15 07:37 AM
|
Joined: Jun 2002
Posts: 6,211
Trail Leader
|
From your post on the AZCrew section, it sounds like you got this all resolved.
John B.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 1.179s Queries: 15 (0.004s) Memory: 0.6020 MB (Peak: 0.6580 MB) Data Comp: Off Server Time: 2026-06-07 08:50:16 UTCValid HTML 5 and Valid CSS