Need a GEN I fan assembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Need a GEN I fan assembly [Re: Liltrbo] #1078273 06/20/15 07:00 PM

Joined: Mar 2006

Posts: 749

Romulus, Michigan (Detroit)

MI_Mitsu

Rock Warrior

Quote

My Monty has the 3.0 6cyl with an aftermarket electric fan. I keep killing fans. They just don't last underwater. I'm assuming the rig came from the factory with a mechanical fan. Am I wrong? I'm hoping to find what I can to convert it back to mechanical. Thanks! Steve

Let me know if you still need a fan - I have 2. One with the clutch still installed, 1 with it removed, but I still have the fan clutch available for that one too.

Entire Thread
Subject	Posted By	Posted
Need a GEN I fan assembly	Liltrbo	06/06/15 11:34 PM
Re: Need a GEN I fan assembly	RECON45	06/08/15 04:10 AM
Re: Need a GEN I fan assembly	heathdogg	06/11/15 11:08 PM
Re: Need a GEN I fan assembly	MI_Mitsu	06/20/15 07:00 PM
Re: Need a GEN I fan assembly	Liltrbo	08/04/15 11:52 PM

Moderated by 4x4Wire, code33, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.161s Queries: 16 (3.521s) Memory: 0.6024 MB (Peak: 0.6354 MB) Data Comp: Off Server Time: 2026-06-05 16:36:39 UTC
Valid HTML 5 and Valid CSS