Did a search and came up empty - I'd like to convert my wiper arms from the flat end to a "J" in order to use more readily-available replacements. I see a couple of different adapters on Amazon, but thought I'd check here before ordering. Any advice?
Danke -
John
1989 SWB V6 Montero
Re: Wiper arm adapter recommendations for Gen 1
[Re: johneric]
#107834706/24/1503:45 AM
Most of the replacement wiper blade assemblies these days come with various plastic attachments to adapt to the ANCO and other wider arm manufacturer's pieces. The flat end with the button simply slides into the adapter piece and you're done.
Unless you find a patient parts guy, say at a NAPA, most of the OTC auto parts stores will not likely help you find if a replacement arm style is available.
De nada, Russell
Re: Wiper arm adapter recommendations for Gen 1
[Re: rxinhed]
#107834806/24/1505:17 PM
Agree, and that's what I was expecting when I ordered from Amazon. No adapters included, though, so I either need to double up, or buy the adapters separate.
I need to call you sometime soon to catch up -
John
1989 SWB V6 Montero
Re: Wiper arm adapter recommendations for Gen 1
[Re: johneric]
#107834906/27/1503:37 AM
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.