Weber conversion w/automatic transmission

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Weber conversion w/automatic transmission [Re: Jedi_Armadillo] #1078520 07/15/15 01:23 AM

Joined: Dec 2011

Posts: 9

NWFl

niceautoguy Offline

Need a Spot

The linkage controls the shift point for all gears. More throttle = later shift point. I used a wire tie loosely looped thru the linkage. I'll try to get a pic for you.

Entire Thread
Subject	Posted By	Posted
Weber conversion w/automatic transmission	Jedi_Armadillo	07/14/15 04:47 AM
Re: Weber conversion w/automatic transmission	niceautoguy	07/15/15 01:23 AM
Re: Weber conversion w/automatic transmission	Jedi_Armadillo	07/15/15 02:14 PM
Re: Weber conversion w/automatic transmission	ryany	07/15/15 07:42 PM
Re: Weber conversion w/automatic transmission	TOASTY	07/15/15 08:18 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.492s) Memory: 0.6013 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-06-06 17:43:00 UTC
Valid HTML 5 and Valid CSS