Nato style jerry cans

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Nato style jerry cans [Re: lordtrunks] #1078590 08/02/15 06:57 PM

Joined: Jan 2002

Posts: 6,134

Gilbert AZ, US.

TOASTY

Trail Leader

Unless there's paint or glue in the rolled part it won't weld or braze properly, maybe could burn the paint off with a torch, bead blast and then braze the bottom. Or we could order a couple pallets of welded Jerry cans from China, they seemed to be good quality. LT, have you put fuel in yours yet?

1999 Montero SAS'd on Kings and stuff

1998 Montero trying to get a V8 Swapped

Entire Thread
Subject	Posted By	Posted
Nato style jerry cans	lordtrunks	07/24/15 12:25 PM
Re: Nato style jerry cans	TOASTY	07/24/15 05:23 PM
Re: Nato style jerry cans	lordtrunks	07/24/15 06:07 PM
Re: Nato style jerry cans	IncorpoRatedX	07/24/15 06:26 PM
Re: Nato style jerry cans	lordtrunks	08/02/15 04:36 PM
Re: Nato style jerry cans	TOASTY	08/02/15 06:57 PM
Re: Nato style jerry cans	lordtrunks	08/04/15 06:33 AM
Re: Nato style jerry cans	lordtrunks	08/04/15 06:39 AM

Moderated by 4x4Wire, TOASTY

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.106s Queries: 16 (3.374s) Memory: 0.6091 MB (Peak: 0.6421 MB) Data Comp: Off Server Time: 2026-05-26 02:32:28 UTC
Valid HTML 5 and Valid CSS