|
|
|
|
22r to 22re
#1078810
08/13/15 07:13 AM
|
Joined: Aug 2015
Posts: 3
OP
Need a Spot
|
Bought a 1991 Toyota pickup. The motor was replaced with older 22r motor between 80 to 83. That motor died. I bought another motor it was suppose to be 89 22r. Well when the motor arrived it was a 22re. It's a full motor has everything. The company told me that they would send me an Intake and carb for the mix up free of charge. My thing is when I took out the 22r I notice that 90% of the wiring was still intake and the computer was still in the truck. I am thinking of trying to get the 22re going as an 22re. My question is what do I need to look for. Cause some one put a low psi inline fuel pump. I know efi needs much more higher psi fuel pump also know that the efi fuel pumps where in the tank. Would it be worth me attempting to go back to efi. Any advice would be greatly appreciated.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.019s Queries: 14 (0.015s) Memory: 0.5812 MB (Peak: 0.6214 MB) Data Comp: Off Server Time: 2026-11-20 00:53:20 UTCValid HTML 5 and Valid CSS