Monty gen 1 mirrors

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Monty gen 1 mirrors [Re: Flyboy] #1078841 09/05/15 07:41 PM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

John eric is right. The two bolt smaller ones adjust on the inside. Take them off, you'll see the screws to adjust it. The ones that resembles truck mirrors, held on by 4 bolts, has two bolts by the pivot, that will tighten it up.

89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch

Entire Thread
Subject	Posted By	Posted
Monty gen 1 mirrors	Flyboy	09/05/15 06:13 AM
Re: Monty gen 1 mirrors	4x4Wire	09/05/15 07:17 AM
Re: Monty gen 1 mirrors	danz91crx	09/05/15 02:28 PM
Re: Monty gen 1 mirrors	Flyboy	09/05/15 03:08 PM
Re: Monty gen 1 mirrors	johneric	09/05/15 06:08 PM
Re: Monty gen 1 mirrors	Mudraider	09/05/15 07:41 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.718s Queries: 16 (3.534s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-22 10:14:01 UTC
Valid HTML 5 and Valid CSS