6g75 swap question. Endeavor 3.8 vs. Montero 3.8

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

6g75 swap question. Endeavor 3.8 vs. Montero 3.8 #1078862 09/06/15 09:40 PM

Joined: Dec 2014

Posts: 30

Monroe, WA

DVoeks

Getting the Wheeling Fever

I have been pricing out long blocks and finally found a 6g75 for my 97' Gen II at a great price with low miles. The problem, which may not be a problem at all, is it is from a 2004 Endeavor. My question is are the Endeavor motors horizontally mounted and if so do they have the proper threaded holes for mounting inline? I have noticed the Montero blocks cost $1,000 or more than the Endeavor. They appear to be the same motor. If I can verify it will mount with little to no problem then I'm pulling the trigger. Thanks.

Dwight

97' Montero SR
99' F250 SCLB 7.3

Entire Thread
Subject	Posted By	Posted
6g75 swap question. Endeavor 3.8 vs. Montero 3.8	DVoeks	09/06/15 09:40 PM
Re: 6g75 swap question. Endeavor 3.8 vs. Montero 3.8	KyleT	09/07/15 01:03 PM
Re: 6g75 swap question. Endeavor 3.8 vs. Montero 3.8	DVoeks	09/08/15 04:32 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: