|
|
94 Montero SR head-gasket project.
#1079055
09/20/15 11:02 PM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
Working on the top end tear-down of my montero, taken many pics, wanted to see if people were interested in my posting and updating as I go along.
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079058
09/21/15 02:55 AM
|
Joined: Dec 2007
Posts: 2,348
Body Damage is Cool
|
Yes, it would be great. I have the same engine on the engine stand.
89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079059
09/21/15 03:13 AM
|
Joined: Apr 2004
Posts: 448
Mudrunner
|
It would be AWESOME and much appreciated!!!!!!  ~ Jon
95 Montero SR 33 x 12.50 Aussie Locker OME Heavy Duty Coils & Torsion Bars ARB Front Bumper 76" Trail Gear Rock Sliders XRC-9.5K Winch
|
|
see if this works.
[Re: mynion]
#1079082
09/22/15 06:30 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
[img] https://goo.gl/photos/an2zxpkb74XDwTpB7[/img] first pic, of it works more to follow.
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: see if this works.
[Re: mynion]
#1079104
09/23/15 06:40 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
|
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079105
09/23/15 06:41 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
|
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079106
09/23/15 07:00 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
hopefully this needs no introduction Throttle body after air intake tube removed The hose that started all this. back side of Plenum Vac hose and temp sensor that go into plenum, pain if you dont remember they are there. Plugs pulled, papertowls to keep stuff out gnition coils pulled as well. [img]http://[/img] [img]http://[/img]
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079107
09/23/15 07:10 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
[img] http://s1042.photobucket.com/user/M...951_zpsbz8zcbth.jpg.html?sort=9&o=27[/img] Fuel lines removed Fuel rails removed lower intakes removed Radiator removed Odd angle, but all belts removed Dr side valvecover removed front
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079108
09/23/15 07:19 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
several days and a strapwrench from amazon later, crank pulley/harmonic ballencer removed this is aparently the natorieous V.1 crank bolt. Timing marks and on the crank and #1 on what I hope is compression stroke.
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
Re: 94 Montero SR head-gasket project.
[Re: mynion]
#1079109
09/23/15 07:22 AM
|
Joined: Oct 2012
Posts: 91
OP
Getting the Wheeling Fever
|
now a question, whats the metal dowel looking thing? here it is in the crank pulley and here in the crank its self, bad pic, sorry. Im concerned that it may have sheared? I will try to get a better pic tomorrow of the crank. this is as far as ive gotten so far, I have more pics that I took for assembly ref, can post or take more if some one needs.
94 montero SR 3.5. 33" BFG TA KO's, OME HD rear springs, front T-bar crank. 93 600 Katana. stage 1 jet kit, Uni foam air filter 02 honda shadow. "for when the woman wants to go with" 97 Acura Integra.
|
|
|
|