1987 Dodge Raider Front Driver half shaft

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1987 Dodge Raider Front Driver half shaft [Re: JohnnyBfromPeoria] #1079167 10/01/15 05:19 AM

Joined: Feb 2005

Posts: 7,458

Montero Ranch

rxinhed

Trail Leader

The bottom ball joint must be disconnected on the left to remove the half shaft. Everything pulls apart pretty easy. Get new c-clips for the reinstallation.

1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya

Entire Thread
Subject	Posted By	Posted
1987 Dodge Raider Front Driver half shaft	87dodgeraider	09/29/15 04:05 PM
Re: 1987 Dodge Raider Front Driver half shaft	off-roader	09/30/15 06:12 PM
Re: 1987 Dodge Raider Front Driver half shaft	JohnnyBfromPeoria	10/01/15 02:37 AM
Re: 1987 Dodge Raider Front Driver half shaft	rxinhed	10/01/15 05:19 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.787s Queries: 16 (3.524s) Memory: 0.5994 MB (Peak: 0.6324 MB) Data Comp: Off Server Time: 2026-06-23 15:42:01 UTC
Valid HTML 5 and Valid CSS