OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.508s Queries: 15 (3.505s) Memory: 0.6697 MB (Peak: 0.7093 MB) Data Comp: Off Server Time: 2026-07-13 10:56:37 UTC
Valid HTML 5 and Valid CSS
Valid HTML 5 and Valid CSS

And whoever thought bolfing things on the firewall side of the head was a good idea needs to be shot... the pass side head the bolts werent to bad, the dr side the firewall is closer to the head and thus even harder, the reassembly of those coolant passages, im not looking forward to that...