fan not blowing until engine has a load

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: fan not blowing until engine has a load [Re: xrtim] #1079446 11/08/15 05:08 AM

Joined: Feb 2000

Posts: 6,247

Bel Buckle, TN

4x4Wire

Trail Leader

I would go back and check the fan. 12 volts should get the fan running. And engine under load will generate more than 12 volts....

John Stewart
Editor - 4x4Wire.com
Editor - 4x4Voice
Editor - MUIRNet-News
President - BlueRibbon Coalition

Entire Thread
Subject	Posted By	Posted
fan not blowing until engine has a load	xrtim	11/08/15 12:01 AM
Re: fan not blowing until engine has a load	4x4Wire	11/08/15 05:08 AM
Re: fan not blowing until engine has a load	xrtim	11/08/15 06:32 PM
Re: fan not blowing until engine has a load	4x4Wire	11/08/15 08:20 PM
Re: fan not blowing until engine has a load	xrtim	11/13/15 01:53 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.268s Queries: 16 (4.264s) Memory: 0.6002 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-11-04 02:22:51 UTC
Valid HTML 5 and Valid CSS