fan not blowing until engine has a load

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: fan not blowing until engine has a load [Re: 4x4Wire] #1079449 11/08/15 06:32 PM

Joined: Sep 2004

Posts: 270

SoCal

xrtim

Mudrunner

The fan is running, the air is being diverted by whatever mechanism controls where it blows from, i.e. defrost vents, upper vents, lower, etc. its like it just isn't coming out where I want it to.

Entire Thread
Subject	Posted By	Posted
fan not blowing until engine has a load	xrtim	11/08/15 12:01 AM
Re: fan not blowing until engine has a load	4x4Wire	11/08/15 05:08 AM
Re: fan not blowing until engine has a load	xrtim	11/08/15 06:32 PM
Re: fan not blowing until engine has a load	4x4Wire	11/08/15 08:20 PM
Re: fan not blowing until engine has a load	xrtim	11/13/15 01:53 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.791s Queries: 16 (5.788s) Memory: 0.6007 MB (Peak: 0.6337 MB) Data Comp: Off Server Time: 2026-11-03 04:54:39 UTC
Valid HTML 5 and Valid CSS