87 SWB Raider Body and welding questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 87 SWB Raider Body and welding questions [Re: ENG1N33R] #1079638 11/29/15 10:31 PM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

1) Depends what you're welding.

2) Need a full cage if doing #3

3) There was one on Pirate. You need to do a cage inside before you do one on the outside.

4) Use that as an excuse to bring you fuel tank up.

89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch

Entire Thread
Subject	Posted By	Posted
87 SWB Raider Body and welding questions	ENG1N33R	11/27/15 06:32 PM
Re: 87 SWB Raider Body and welding questions	Mudraider	11/29/15 10:31 PM
Re: 87 SWB Raider Body and welding questions	ENG1N33R	11/30/15 09:18 PM
Re: 87 SWB Raider Body and welding questions	Mudraider	12/02/15 04:03 AM
Re: 87 SWB Raider Body and welding questions	ENG1N33R	12/05/15 05:21 PM
Re: 87 SWB Raider Body and welding questions	Mudraider	12/06/15 01:25 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.482s Queries: 16 (3.480s) Memory: 0.6030 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-07-16 05:53:53 UTC
Valid HTML 5 and Valid CSS