1989 SWB crank angle sensor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1989 SWB crank angle sensor [Re: MisterEd] #1079933 02/03/16 12:30 PM

Joined: Dec 2014

Posts: 9

North Carolina

MisterEd

Need a Spot

Input is also accepted in the form of information on what's needed to replace the mechanically timed 6g72 with the electronically timed 6g72 -OR- where to find a source of relatively inexpensive compatible 6g72s. :3

Last edited by MisterEd; 02/03/16 12:31 PM.

Entire Thread
Subject	Posted By	Posted
1989 SWB crank angle sensor	MisterEd	02/03/16 12:27 PM
Re: 1989 SWB crank angle sensor	MisterEd	02/03/16 12:30 PM
Re: 1989 SWB crank angle sensor	fasteddy	02/03/16 09:09 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.532s Queries: 16 (3.530s) Memory: 0.5949 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-05 12:45:55 UTC
Valid HTML 5 and Valid CSS