Gen 1 3'' Body Lift Questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen 1 3'' Body Lift Questions #1080095 03/09/16 07:17 AM

Joined: Nov 2015

Posts: 18

Chico, CA

DJPASS7

Need a Spot

I'm wanting to do a 3" BL on my Gen 1 LWB. From what I've read, I haven't seen anyone who has done a 3", only 2". My question is has anyone done a 3" BL and are there any major obstacles aside from the normal obstacles one encounters when doing a 2"?
Thanks,
DJ

1989 Montero LS LWB
Rear LSD, KYB's, 3.0L, Lockup A/T, 2" BL, T-Bar Crank, 33" MTZ's, Full Length Roof Rack, 9k Winch with custom bumper, Rock Sliderz

Entire Thread
Subject	Posted By	Posted
Gen 1 3'' Body Lift Questions	DJPASS7	03/09/16 07:17 AM
Re: Gen 1 3'' Body Lift Questions	Mudraider	03/10/16 02:44 AM
Re: Gen 1 3'' Body Lift Questions	jwthemechanic	03/10/16 05:09 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.497s Queries: 15 (3.495s) Memory: 0.5965 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-06-07 12:50:53 UTC
Valid HTML 5 and Valid CSS