Then it's cut off the old upper shock mount. Take some thick wall 2" square tubing, and this is what I came up with. The long part will be welded to the inside of the frame. The box will sit on top of the frame and be welded also. If you can see the pink dot. That will get drilled, and a 12mm bolt welded to it to mount the shock. Or maybe just bolted

[Linked Image]

89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch