|
|
|
|
wheel well clearance
#1082452
10/09/06 01:32 AM
|
Joined: Sep 2006
Posts: 49
OP
Getting the Wheeling Fever
|
so now i have my own 4x4 prject to start working on. a 92 pathfinder. it has 31x10.5 size tires on it right now. which leaves very little clearance from tire to wheel well. Also i am pretty sure i have no flex in the suspension right now. and if there is some its very little. I have been recomended by several 4x4 technicians at 4wheel parts that its not a good idea to lift the truck as it puts huge stress on the other supension components. (suspension or body) My question is there a way to get more flex out of the suspension and have more clearance in the wells, with out lifting the truck? I would like to keep the same size tires it has currently. so is there a way to accomplish my wishes? let me know thanks.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.684s Queries: 15 (4.681s) Memory: 0.5920 MB (Peak: 0.6250 MB) Data Comp: Off Server Time: 2026-11-18 03:46:39 UTCValid HTML 5 and Valid CSS