Anyone feel like installing a set of AISINs? ive been meaning to get them done, but between mowing grass, and all the other yard work (which im supposed to be doing now <img src="/forums/images/graemlins/scared.gif" alt="" />) it doesnt look like ill get them on between now and friday. Ill have a 3 ton floor jack, 2 3 ton jackstands, my tool set, half my dads tool set and other random assorted junk.

***on a similar note, does any one have one of the 1" spacers that goes between the hub and the 26mm cclip that they could donate? i only need one as my new hubs only came with one***

We will prolly be down between 8 and 9 on friday if all goes well. Is that too late for the meal?

-J <img src="/forums/images/graemlins/kewl.gif" alt="" />

<img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />

Hey Jordan that's a good one. Smiley is cooking the Saturday night meal. So yeah you'll be right on time for the meal at 9 or 10.

If nobody else bucks up I'll put them on for you.

Joe

Like Joe said, I think you'll probably make it in time for the Saturday night meal. <img src="/forums/images/graemlins/wink.gif" alt="" />

As far as I know, Saturday's will be the only Group Meal...
Unless maybe we go into town on Friday and eat at Zeno's again.


So, I take it that I can add you and Lamar to the list for Saturday (???)


Cheers! <img src="/forums/images/graemlins/cheers.gif" alt="" />
Smiley

ha ha ha... laugh it up... <img src="/forums/images/graemlins/pfft.gif" alt="" />
we're down for the group meal if its at $5. Otherwise we might be having sardine al a carte with a side of vienna en saltine... <img src="/forums/images/graemlins/lol.gif" alt="" />

anyone have any of those spacers i mentioned^^?
-J <img src="/forums/images/graemlins/kewl.gif" alt="" />

Very sorry to hear it! <img src="/forums/images/graemlins/frown.gif" alt="" /> <img src="/forums/images/graemlins/frown.gif" alt="" /> <img src="/forums/images/graemlins/frown.gif" alt="" />


[color:"white"][b][ Attendance List Updated ][/b][/color]


Smiley

I asked for the same thing 1 year ago. Do you mean a washer or an actual 1" spacer? My junk only takes a washer thats 1 or 2mm thick. If thats it, I might have one, have to look around.

Most of you are used to my last minute plans and probably figure I'll be pulling in late Friday night, but I'm sad to report I'm going to have to pass this one up.

My girlfriend (and co-pilot) Jessica who's will be out of town visiting relitives in NJ and I'll be stuck pulling some long hours at work this weekend. I have to over see Dell engineers on the installation of 30 new servers, 1 SAN, and a new fiber fabric, in addition to migrating all data/configurations from our existing hardware (don't you just love lease agreements!) Anyway, i'll be lucky just to catch a little sleep this weekend let alone make it down to Uwharrie.

So I wish you guys a good weekend. I'll have to catch you next time (and just maybe i'll have another project completed on the Rodeo... hint, hint)

-Rob

Rob,

Bummer! <img src="/forums/images/graemlins/frown.gif" alt="" />

But I suppose it could have been worseà It could have happened next month instead! <img src="/forums/images/graemlins/scared.gif" alt="" />
At least this way it wonÆt jam you up for Moab.

(Looking forward to seeing the 'hint-hint')


<img src="/forums/images/graemlins/cheers.gif" alt="" />
<img src="/forums/images/graemlins/smile.gif" alt="" />

Yeah, thats what im talking about. its the 1" inside diameter washer (2mm thick) that goes right behind the 26mm c-clip. if you could find one, that'd be great.
-J <img src="/forums/images/graemlins/kewl.gif" alt="" />

Another one bites the dust. I'm out!

I knew work schedule wasn't looking favorable, but I think it's got he best of me. Dang Six Sigmas!! I might show up late Friday in the Windstar, but at this point the trooper will be a no show.