Bad news <img src="/forums/images/graemlins/frown.gif" alt="" />

My death wobble has been diagnosed as play in the lower a-arm bushing. And my a-arms do not come off. Trust me, I used a 20 ton press on that mounting bolt and it started to bend the mount before I gave up. So it looks like my only option is to cut everything off and get a new a-arm and bolts and bushings.

That, and I need a new rear driveshaft, new wheel bearings, 2 new tie rod ends, a new steering shaft joint, new rear brake pads/rotors, rear axle seal is leaky, phhh what else am I forgetting...yep I'm 15k overdue for timing belt/water pump...

Basically, the rodeo isn't up for the trip to Uwharrie. As it is, rodeo ain't up for driving me to work right now. <img src="/forums/images/graemlins/frown.gif" alt="" />

Mike

"Damn the carnage! Full throttle ahead!"

95.5 rodeo, 37" Trxus MT, dana 44/9", coil-overs, lockers..... http://www.cardomain.com/memberpage/550454