how to check and confirm Montero oil pressure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: how to check and confirm Montero oil pressure [Re: wilde] #1101446 06/04/16 11:37 PM

Joined: Dec 2006

Posts: 163

Franklin IN

cheesegrater Offline

Wheeler

I'm pretty sure that any situation which would cause low pressure, such as worn bearings, anywhere in the oil system, would register as low pressure all across the system. Conversely, if a blockage causes one section to be oil starved, it would create a high pressure situation in the whole system.

Last edited by cheesegrater; 06/04/16 11:39 PM.

Entire Thread
Subject	Posted By	Posted
how to check and confirm Montero oil pressure	wilde	06/04/16 10:21 PM
Re: how to check and confirm Montero oil pressure	cheesegrater	06/04/16 11:37 PM
Re: how to check and confirm Montero oil pressure	Mudraider	06/05/16 02:42 PM
Re: how to check and confirm Montero oil pressure	Mudraider	06/05/16 03:11 PM
Re: how to check and confirm Montero oil pressure	ryany	06/05/16 05:52 PM
Re: how to check and confirm Montero oil pressure	ES_97Sport	06/06/16 06:01 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.064s Queries: 16 (5.061s) Memory: 0.6015 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-25 00:29:45 UTC
Valid HTML 5 and Valid CSS