Man... I could sure use some advice. I have searched HIGH and low... On this forum, on other forums.. Even on other car forums.

Basically what I traced down to the MAF sensor (or so I thought). I was able to start the truck and keep it running if I had the MAF Sensor unplugged, but if I touched the gas she would dies. Got another MAF Sensor off a truck that had been running fine before being wrecked. Plugged in and the Montero started and ran, but same issue, touch the gas and it dies.

I have been through the TPS, IAC, ECU, MFI Relay, Fuel Pump, MAF Sensor, cleaned the throttle body... Im at my wits end here.

Any ideas??