Crankshaft Pully Removal on Gen1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Crankshaft Pully Removal on Gen1 [Re: AlexM] #1101737 07/10/16 11:27 PM

Joined: Jul 2014

Posts: 22

Washington State

AlexM

Need a Spot

So a little more digging and it looks like this is the part I need:

TIMING SPROCKET CRANKSHAFT GEAR LOWER
- 1990 MITSUBISHI MONTERO (MD100568)

And there are a few places it looks like I can get it.

Alex.

----------------------------
AlexM.
Limited Mechanical Skills
'90 Montero RS 5-speed

Entire Thread
Subject	Posted By	Posted
Crankshaft Pully Removal on Gen1	AlexM	07/09/16 06:18 AM
Re: Crankshaft Pully Removal on Gen1	fasteddy	07/10/16 12:40 PM
Re: Crankshaft Pully Removal on Gen1	pcc	07/10/16 05:38 PM
Re: Crankshaft Pully Removal on Gen1	JAVYPRO	07/10/16 07:16 PM
Re: Crankshaft Pully Removal on Gen1	AlexM	07/10/16 11:00 PM
Re: Crankshaft Pully Removal on Gen1	AlexM	07/10/16 11:27 PM
Re: Crankshaft Pully Removal on Gen1	fasteddy	07/12/16 01:26 AM
Re: Crankshaft Pully Removal on Gen1	AlexM	07/12/16 04:31 AM
Re: Crankshaft Pully Removal on Gen1	AlexM	07/18/16 04:35 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.142s Queries: 16 (3.787s) Memory: 0.6093 MB (Peak: 0.6423 MB) Data Comp: Off Server Time: 2026-05-28 20:54:28 UTC
Valid HTML 5 and Valid CSS