Access to overdrive solenoid 1990 Montero

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Access to overdrive solenoid 1990 Montero #1101860 07/31/16 09:35 PM

Joined: Jul 2016

Posts: 4

Viola, il

Foxmontero Offline

Need a Spot

I have read many of the posts regarding the Overdrive issue and have ordered a new solenoid and relay. (I replaced the temp sending unit first). Can someone tell me the easiest method to access the solenoid? Looking at the picture in the FSM, it is located on the driver side of the tranny. Which interior trim pieces need to be removed for access? Thanks !!

I'm also looking for some gen 2 rear coil springs to purchase. Any suggestions?

Last edited by Foxmontero; 07/31/16 09:37 PM.

Entire Thread
Subject	Posted By	Posted
Access to overdrive solenoid 1990 Montero	Foxmontero	07/31/16 09:35 PM
Re: Access to overdrive solenoid 1990 Montero	rxinhed	07/31/16 10:00 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.663s Queries: 15 (3.830s) Memory: 0.5947 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-10-27 15:42:14 UTC
Valid HTML 5 and Valid CSS