Gen1 Montero Engine Swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen1 Montero Engine Swap #1102352 10/27/16 05:56 AM

Joined: Oct 2016

Posts: 1

Mjopdycke

Need a Spot

Hey everyone! New to the forum seems like a really helpful place. My Gen1 has 6G72 3.0, and it's toast. What engines bolt up to the auto transmission? Diamante 3.0 DOHC? I'm fine with the power I get out of the SOHC but I can get the DOHC for pretty cheap. What engines bolt up? Will I need a donor wiring harness and ECU?

Entire Thread
Subject	Posted By	Posted
Gen1 Montero Engine Swap	Mjopdycke	10/27/16 05:56 AM
Re: Gen1 Montero Engine Swap	rxinhed	10/29/16 06:25 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.700s Queries: 15 (3.359s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-05-25 14:25:02 UTC
Valid HTML 5 and Valid CSS